Digital Tachometers, RPM , Speed Indicators,counters, timers,Amp-Hour/Amp-Minute Meters,Humidity Indicators/Controllers,Conductivity Indicators,pH/ORP Indicators/Controllers,Temperature Indicators,Process Controllers,Calibrators,Transmitters/Converters ,Flow Indicators and Controllers

Home New Products Contact Us
About Us Products Feedback Contact Us

 
Model 2500

 


Programmable Counter


Features
  • 6 Digit Preset Counter
  • Dual Limits settable with dual relay output
  • Programmable Scale Factor of 0.001 to 999.999
  • Pre-settable Batch Counter
  • Cumulative 6 Digit Counter
  • Up/Down Counting Selectable
  • Normal/Auto-Reset with Time setting
  • Non-Volatile memory to hold settings and counts
  • Program configuration lock at rear
  • External Setting for Slow/Fast for noiseless operation
Specification

Display : 6 Digit, 7 segment LED display (0.3” height)
Range : Selectable least count of 0.001, 0.01, 0.1, 1. Maximum Count of 999999
Set Points : Two set points each programmable from 0.001 to 999999
Batch Limit : Batch limit setting from 0 to 999
Operating Modes : a. Auto Mode b. Manual Mode c. No limit Mode (Event Counter)
Count Inputs : a. Voltage Pulse : 3V to 30V DC amplitude from proximity switch
b. Potential free contact from limit switch, relay or micro switch
Input Frequency : a. 0 to 30 Hz b. 0 to 1 KHz
Sensor Supply : 10V DC, short circuit protected
Scale Factor : Programmable from 0.001 to 999.999
Reset Input : a. Front Panel b. Remote reset
Relay Outputs : Two relays, one for each set point; 1 C/O (SPDT) rated at 5Amp @ 230 V AC
Memory Retention : 10 years
Configuration Lock : Via rear DIP-Switch to avoid changes in configured parameters by mistake
Mounting : Panel Mounting
Size : 72mm x 72mm
Weight : Approx. 375 gms.
Operating Temp. : 0-50 degeesC
Humidity : 95% RH
About Us   |   Products   |   Feedback   |   Contact Us   |   Our New Products
Copyright © 2006, COUNTRONICS, All rights reserved. SEO BY SEO INDIA