| Display |
:2
Line alphanumeric display with back light
illumination
4
digit for Load in KN ,
3 digit for Pace Rate in KN/sec
Peak/Normal
indication
|
| Range |
:
a.
Load
: 0.1KN
to
6000KN
b. Set Load (Limit)
: 0.1KN
to
6000KN
c. Sample Area
: 0.1cm2
to
999.9cm2
|
| Accuracy | :±0.1%
of Full Scale ± 1 digit
|
| Input |
:
From 2 wire loop transmitter giving 4-20mA
output
4-20mA
input => 0 - Range |
| Relay Logic | : When Actual Load ≥ Set Load Limit relay
switches On. |
| Normal/Peak Mode | :
Selectable from front panel with indication of mode
|
| Serial
Output | :
Formatted RS-232 output to interface for
logging using Hyperterminal
|
| Real
Time Clock | :
Date and Time setting with internal battery backup
|
| Sample No. |
: Auto increment
with resetting option |
| Peak Detection |
: Peak hold is resettable
from front Reset Switch or by parallel
rear
external contact |
| Tare Facility (Zero) |
:
Digital Tare using front panel Tare switch
up to a maximum of
50KN (for removing
initial offset error) |
| Memory | :
Non-volatile EEPROM to save settings
|
| Configuration Lock |
: On rear terminals to prevent
unauthorized/accidental alteration of Range
using front switches
|
| Supply | : 220V AC ± 15% @ 50/60Hz |
| Dimensions |
: Front Fascia: 96mm x
192mm
Cut
Out : 92mm x 188mm
|
)