Digital Tachometers, RPM , Speed Indicators,counters, timers,Amp-Hour/Amp-Minute Meters,Humidity Indicators/Controllers,Conductivity Indicators,pH/ORP Indicators/Controllers,Temperature Indicators,Process Controllers,Calibrators,Transmitters/Converters ,Flow Indicators and Controllers

Home New Products Contact Us
About Us Products Feedback Contact Us

 
Model 2602

 


Universal Process Controller
 
 

 


Features

  • Microprocessor based precision controller
  • Linearised for 7 types of common thermocouples and PT100 Temperature sensor with Auto cold junction compensation.
  • Input for 4-20mA / 0-20mA / 1-5V / 0-5V from Tx for Pressure, Humidity, pH, Temperature etc.
  • Display user programmable from 0 to 9999
  • 4 Digit 0.56” Bright 7 Segment LEDs.
  • Decimal user settable.
  • Separate heater & cooler logic relays
  • Hysterisis of relay control settable
  • Offset separately programmed from front
  • Configuration lockable by rear jumper
  • Excitation voltage for loop Tx. Sourced
  • Touch type membrane control keys
Specification

Display : 4 Digit 0.56” Red 7 Segment LED display
Inputs : Linear (Universal from Tx)
0-20mA, 4-20mA, 0-5V & 1-5V
Non-linear (temperature sensors)
T/C – B,E,R,S,T,J,K and 3 Wire PT100
Accuracy : +/-0.25% of SPAN +/- 1 Count
Resolution : Settable 0.001 to 9999 for linear inputs. Settable 1.0 or 0.1 for Temperature Display
Control : 2 Set of Control Limits.
Set-1 heater logic and Set-2 cooler logic.
5 Amps/220V AC Relay Contact output.
Hysterisis settable
Calibration : By software. Ambient by rear Pot
Configuration Lock : Jumper at rear
Exciter Voltage : 24V @ 30mA for loop Tx
Power : 220V AC +/- 15% @ 50/60 Hz
Ambient : 0-55 degrees C.
Humidity : Up to 90% (non-condensing)
Power Consumption : 10VA
Case : 48 x 96 x 180 mm Plastic ABS
Front Fascia : 48 x 96 mm
Panel Cutout : 45 x 92 mm
About Us   |   Products   |   Feedback   |   Contact Us   |   Our New Products
Copyright © 2006, COUNTRONICS, All rights reserved. SEO BY SEO INDIA