Digital Tachometers, RPM , Speed Indicators,counters, timers,Amp-Hour/Amp-Minute Meters,Humidity Indicators/Controllers,Conductivity Indicators,pH/ORP Indicators/Controllers,Temperature Indicators,Process Controllers,Calibrators,Transmitters/Converters ,Flow Indicators and Controllers

Home New Products Contact Us
About Us Products Feedback Contact Us

 
Model 6265

 


Profile Controller


Features
  • Micro-controller based with Non-volatile memory
  • 4 Profiles, each with max. 9 programmable segments
  • Each segment programmable as Heat/Cool Ramp or Soak
  • Built-in Proportional Control for Heater
  • Membrane switches to set the program parameters
  • Configuration lock at rear
  • Current status stored on power failure
  • Selected profile front panel indication
  • Separate Relay outputs for Heater & Cooler
  • Compact and attractive 48 x 96mm rugged ABS cabinet
Specification


Relay Contacts rated for 5A at 220V AC
Display :4 Digit 7 Segment 0.56” height Red LED display
2 LEDs to display status of Heating and Cooling relays
4 LEDs to display current selected Profile
Temperature Range : 0-1250°C
Sensor:K Type Thermocouple with Auto Cold Junction Compensation
Control Outputs : NO1-P1-NC1 for Heater & NO2-P2-NC2 for Cooler
Control Action : ON/OFF with -7°C and +3°C Proportional Band for heater with Time cycle
of 20 sec. Cooling Relay ON at (Set Point + 5°C) with 1°C hysterisis
Profiles : Up to 4 separate profiles, each with 9 segments programmable as Ramp or
Soak with individual Slopes, Time Intervals and Set Points
Ramp Rate/Segment : Settable from 0-999°C/Hr
Soaking Temp/Segment : 0 - 1250°C
Soaking Time/Segment : 0 – 99.99 Hrs
Power Failure : Resumption from point of failure
Reset : From front/rear in case the cycle is to be aborted and restarted
Size : 48mm x 96mm x 180mm. Cutout: 44mm x 92mm
Supply : 220VAC ± 10% at 50/60 Hz
About Us   |   Products   |   Feedback   |   Contact Us   |   Our New Products
Copyright © 2006, COUNTRONICS, All rights reserved.