| Display |
:
4 digit 0.56 ± 7 segment Red LED display
for Temperature
: 4 digit 0.56 ± 7 segment Red LED display
for Set Point
|
| Range |
:
J T/C:0 to 750°C K T/C:0 to 1250°C
R T/C:0
to 1700°C
PT100: -100.0 to 600.0°C
|
| Sensor |
: J,K,R & 3 wire PT100 |
| Accuracy |
: ±0.1% of Full Scale
±1 digit |
| Relay Logic |
:
In
On/Off mode (P=0), Relay programmable as
Heater/Cooler
logic
In PID mode, cycle time of 5sec for
SSR and 20sec for Relay
5 Amps/220V AC Relay Contact outputs
+10V output for SSR
|
| Proportional Band (P) |
:
Settable from 0-200.0
|
| Integral Time (I) |
: Settable from
0-3000secs |
| Derivative Time (D) |
: Settable from
0-3000secs |
| Hysterisis Band |
:
Settable from 0˚C to 20.0˚C (For On/Off
mode i.e. P=0)
|
| Offset Band |
: Settable from
-20.0˚C to +20.0˚C |
| Memory |
: Non-volatile EEPROM to save settings |
| Configuration Lock |
: On rear terminals to prevent tampering
with configuration
except Set Point
|
| Supply |
: 220V AC ± 15% @ 50/60Hz |
| Dimensions |
: Front Fascia: 96mm x 96mm x 135mm.
Cut Out : 91mm x 91mm
|
| Weight |
: 800 grams |
)