| Display |
:4 digit 0.56± 7 segment Red LED display
for Temperature
height Red
:4 digit 0.56± 7 segment Green LED display
for Set Point |
| Range |
:J T/C:0 to 750°C K T/C:0 to 1250°C R T/C:0
to 1700°C PT100: -100.0 to 600.0°C |
| Sensor |
:J,K,R & 3 wire PT100 |
| Accuracy |
: ±0.1% of Full Scale ±1 digit |
| Relay Logic |
:On/Off or time proportional with 20 sec
cycle time for heater relay (Relay 1) On/Off
for Cooler / Alarm Relay (Relay 2). 5 Amps/220V
AC Relay Contact outputs |
| Profiles |
:Up to 4 separate profiles, each with 9
segments programmable as Ramp or Soak with
individual Slopes, Time Intervals and Set
Points |
| Ramp Rate/Segment |
:Settable from 0-999°C/Hr |
| Soaking Temp/Segment |
:0 - 1250°C |
| Soaking Time/Segment |
:0 ±99.99 Hrs |
| Power Supply |
:220V AC ± 15% at 50Hz |
| Proportional Band |
: -7.0 °C to +3.0 °C around set point with
10% per degree cut |
| Hysterisis Band |
: Settable from 0°C to 20.0°C |
| Percentage Power |
: User programmable from 0% to 100% to avoid
overshoots and save power |
| Memory |
: Non-volatile EEPROM to save settings |
| Configuration Lock |
: On rear terminals to prevent tampering
with configuration except Set Point |
| Supply |
: 220V AC 15% @ 50/60Hz |
| Dimensions |
: Front Fascia: 96mm x 96mm x 135mm.
Cut Out : 91mm x 91mm |
| Offset |
:Settable from -20.0°C to +20.0°C |
