• Microprocessor based controller, linearised for PT100 sensor & 3 thermocouples (J,K,R) with Auto cold junction compensation
  • Auto/Manual tuning selectable
  • PID/On-Off control user selectable
  • Separate displays for Temperature and Set Point
  • Output selectable as Heater/Cooler logic in On/off mode
  • Relay/SSR output selectable
  • Offset digitally programmable from front
  • Configuration lockable by rear jumper
  • User programmable hysterisis band in On/Off mode
  • Non-volatile memory to save settings
  • Aesthetically designed panel with membrane switches
Display 4 digit 0.56” 7 segment Red LED display for
4 digit 0.56” 7 segment Red LED display for
Set Point
Sensor J,K,R or 3 wire PT100
Range J T/C : 0 to 750˚C K T/C : 0 to 1250˚C
R T/C : 0 to 1700˚C
PT100: -100.0 to +600.0˚C
Accuracy ±0.1% of Full Scale ± 1 digit
Relay Logic In On/Off mode (P=0), Relay programmable
as Heater/Cooler logic
In PID mode, cycle time of 5sec for SSR and
20sec for Relay
5 Amps/220V AC Relay Contact outputs
+10V output for SSR
Proportional Band (P) Settable from 0-200.0
Integral Time (I) Settable from 0-3000secs
Derivative Time (D) Settable from 0-3000secs
Hysterisis Band Settable from 0˚C to 20.0˚C
(For On/Off mode i.e. P=0)
Offset Band Settable from -20.0˚C to +20.0˚C
Memory Non-volatile EEPROM to save settings
Configuration Lock Open terminals 4&5 to lock the Sensor
type, Relay logic and SSR/Relay selection
Supply 220V AC ± 15% @ 50/60Hz
Dimensions 96mm x 96mm x 135mm.
Cut Out : 91mm x 91mm
Weight 800 grams
Related Products