Model code:6215-BL
Product Name:Blood bank temperature controller with in-built pr
Category:digital_temperature_indicators_controlle
Sub Category:loggers
Temperature display linearised for 3 wire PT100 input
Internal printer for logging of temperature at user settable time intervals
Internal Real Time Clock with re-chargeable battery backup
Set point for controlling temperature of refrigeration
Dual display of both temperature and Set Point
User settable window limit with internal buzzer to indicate temperature outside desirable temperature band
Internal buzzer to indicate power failure
Auto blanking of Set point
| Display | : 4 Digit 0.56" 7 Segment Red LEDs for Temperature 4 Digit 0.56" 7 Segment Red LEDs for Set Point |
| Sensor | : 3 wire PT100 |
| Range | : -99.9 to + 100.0˚C |
| Accuracy | : +/-0.1% of Full Scale +/-1 digit |
| Printing Mechanism | : Thermal printing mechanism using thermal paper |
| Paper | : Thermal paper (56mm wide) |
| Printing Rate | : User settable from 0-99mins |
| Real Time Clock | : User changeable with internal battery backup |
| Relay Logic | : Relay with Cooling logic Relay Off for Temperature < Set Point1 Relay On for Temperature > Set Point 2 (where Set Point 1 < Set Point 2) 5 Amps/220V AC Relay Contact outputs |
| Buzzer logic | : 1. Window alarm buzzer i.e. Buzzer on for Set Point -Alarm >Temperature > Set Point + Alarm 2. Switch ON of Buzzer on AC Mains power failure |
| Offset Band | : Settable from -20.0˚C to +20.0˚C |
| Memory | : Non-volatile EEPROM for saving settings |
| Supply | : 220V AC ± 15% at 50/60Hz |
| Ambient Temp. | : Maximum 55˚C |
| Size | : 96 x 192 x 170mm |
