Category: Conductivity Meter Indicator Controller
SKU: 160-TDS
Features
- Auto/Manual temperature compensation selectable
- Cell Factor selectable for both 1.0 and 0.1
- Digital calibration for TDS
- Auto Temp Compensation using PT100 sensor
- Dual set limit with separate relay outputs
- Settable hysteresis for both set limits
- Bright Red LED display with separate display for set limit-1
- Aesthetically designed front panel with membrane switches and ABS cabinet
Specification
| Display | 0.56” Red LED 7 segment Display for Conductivity/TDS 0.56” Red LED 7 segment Display for Set-Limit-1 |
| Ranges | 0-5000ppm |
| Resolution | 1ppm |
| Temp. Comp | Uses PT100, precision temperature sensor (External) The Compensation is internally set at 2% per ˚C |
| Manual Temp. Comp | Settable from front panel from 0-100.0˚C |
| TDS Calibration | Digital calibration by factor multiplication from 0.75-1.25 |
| Recorder Output | Isolated 4-20mA => 0-2000 (for whatever unit and resolution selected (Maximum termination 250Ω) |
| Control Output | Two set of NO-P-NC, 5 Amps potential free Relay Contacts Relay 1 ON, for Cond/TDS < Set Limit1 – Hysterises1, Relay 1 OFF, for Cond/TDS > Set Limit1 Relay 2 OFF, for Cond/TDS < Set Limit2,Relay 2 ON, for Cond/TDS > Set Limit2 + Hysterises2 |
| Accuracy | 0.5% ± 1 Digit |
| Supply | 220V AC ±10% @ 50Hz |
| Enclosure | Plastic (ABS). Size -96x96x110mmm |
| Weight | 900 grams |
