• Data saved directly on USB Pen drive in an MS Excel compatible file
  • Microprocessor based linearised for J/K/R Thermocouples and PT100 temperature sensors.
  • Auto cold junction compensation for thermocouples and 3 wire input for PT100
  • Rate of logging settable by user in Mins:Secs
  • Digital offset user settable
  • Heat/Cool mode for control action user settable
  • Set Point for temperature control user settable
  • Internal Real Time Clock with battery backup for saving values along with Date and Time
  • No need of any complicated or additional software for managing data
  • Saving data on Pen drive allows a very large amount of storage space at very low cost.
Display 4+4 digit 0.56” 7 segment Red LED
Sensor J,K,R & 3 wire PT100
Range J T/C : 0 to 750˚C K T/C : 0 to 1250˚C
R T/C : 0 to 1700˚C
PT100: -100.0 to +600.0˚C
Accuracy ±0.1% of Full Scale ± 1 digit
Relay Logic Programmable as Heater/Cooler logic
On/Off or time proportional with 15 sec
cycle time for heater logic
On/Off for cooler logic
5 Amps/220V AC Relay Contact outputs
Proportional Band -7.0˚C to +3.0˚C around set point with

10% per degree cut

Hysterisis Band Settable from 0˚C to 20.0˚C
Percentage Power User programmable from 0% to 100% to
avoid overshoots and save power
Offset Band Settable from -20.0˚C to +20.0˚C
Memory Non-volatile EEPROM to save settings
Configuration Lock Open terminals 4&5 to lock the Sensor
type, Relay logic and Set Limits

Supply 220V AC ± 15% @ 50/60Hz
Dimensions 96mm x 96mm x 135mm.
Cut Out : 91mm x 91mm
Weight 800 grams
Related Products