Sale!
6 Digit Ampere Hour Meter with separate displays for voltage and current

6 Digit Ampere Hour Meter with separate displays for voltage and current

Please install and activate YITH WooCommerce Wishlist to add product wishlist
Category : Amp-Hour Category : Battery Testing Application
SKU: 803AH
Download Catalogue

Description

  • Ideal for ensuring electroplating thickness by presetting AMP-HOUR
  • Useful for checking Amp-Hour of rechargeable batteries using voltage limit
  • Separate displays for Voltage, Current and Amp-Hour
  • Programmable for AH/0.1AH/Amin/0.1AMin
  • Usable with any shunt by setting ‘Calibration’ for Amp-75mV
  • Calibration factor lockable from rear
  • 4 Digit Amp-Hour and 6 Digit cumulative Amp-Hour display
  • Attractive front panel membrane switches in rugged Aluminum cabinet
  • In case of power failure, the current status of selected parameters, the current Amp-Hour and Cumulative Amp-Hour is saved

Additional information

Your custom text or HTML.

Display

All of 0.56in character height Red 7 Segment displays
a.3 Digits to display voltage 0 – 99.9V
b.4 Digits to display current 0 – 999.9Amps
c.6 Digits to display Amp-Hour (4 Digit) and cumulative Amp-Hour (6 Digit)
Max. Shunt

Max. value of 999.9 Amps corresponding to 75mV. User programmable from front in ‘CAL’ mode. (Max. value of 9999Amps also available on request)
Selection of Amp

Short Pin 17-18 for Amp-Hour
Hour/Min

Open link of Pin 17-18 for Amp-Minute
0.1AH/Amin

Higher 0.1 resolution by shifting internal jumper by opening cover
Totaliser

6 Digit readable in ‘Total’ Mode
Limit

Up to 9999 Ahr/Amin settable in limit mode using increment/decrement switches
Relay

NO-P-NC of 5 Amp at 220V AC contact rating
Start

Pressing front panel switch or momentarily shorting rear Pins 5 & 6 by wiring an external switch
Memory

Non-volatile EEPROM solid state memory
Stores programmed value of shunt, preset value, current Amp-Hr and the current
Cumulative Amp-Hr to preserve current status on power failure
Lock

Open Link between Pin 1 & 2 to Lock ‘Cal’ i.e. shunt value
Low Volt.

Internally set at 10.5V for testing 12V battery. Short Pins 3
Stop

4 for this function
Supply

220V AC ± 10% at 50/60Hz
Size

Vertical type with front panel 96 x 192 mm
Terminals

At rear with marking for wiring
Mounting

Panel Mounted
Fuse

At rear of 0.2Amps

Additional Information

Display:
All of 0.56in character height Red 7 Segment displays a.3 Digits to display voltage 0 – 99.9V b.4 Digits to display current 0 – 999.9Amps c.6 Digits to display Amp-Hour (4 Digit) and cumulative Amp-Hour (6 Digit)
Max. Shunt:
Max. value of 999.9 Amps corresponding to 75mV. User programmable from front in ‘CAL’ mode. (Max. value of 9999Amps also available on request)
Selection of Amp:
Short Pin 17-18 for Amp-Hour
Hour/Min:
Open link of Pin 17-18 for Amp-Minute
0.1AH/Amin:
Higher 0.1 resolution by shifting internal jumper by opening cover
Totaliser:
6 Digit readable in ‘Total’ Mode
Limit:
Up to 9999 Ahr/Amin settable in limit mode using increment/decrement switches
Relay:
NO-P-NC of 5 Amp at 220V AC contact rating
Start:
Pressing front panel switch or momentarily shorting rear Pins 5 & 6 by wiring an external switch
Memory:
Non-volatile EEPROM solid state memory Stores programmed value of shunt, preset value, current Amp-Hr and the current Cumulative Amp-Hr to preserve current status on power failure
Lock:
Open Link between Pin 1 & 2 to Lock ‘Cal’ i.e. shunt value
Low Volt.:
Internally set at 10.5V for testing 12V battery. Short Pins 3
Stop:
4 for this function
Supply:
220V AC ± 10% at 50/60Hz
Size:
Vertical type with front panel 96 x 192 mm
Terminals:
At rear with marking for wiring
Mounting:
Panel Mounted
Fuse:
At rear of 0.2Amps

Related products