• Microprocessor based controller, K thermocouple with Auto cold junction compensation
  • Separate displays for Temperature and Timing
  • Heater relay output to control temperature
  • Soak Time settable from 1-999mins and activated after set temperature is reached
  • Alarm relay output to indicate end of soak time and any intermediate heater failure
  • Current status of soak timing saved on power failure
  • Non-volatile memory to save settings
  • Parallel reset switch at rear for rugged usage for restarting each cycle
  • Aesthetically designed front panel with membrane switches
Display 4 digit 0.56” 7 segment Red LED display for Temperature
4 digit 0.56” 7 segment Red LED display for current soak timing
Sensor K thermocouple
Temp range : 0 to 1250˚C
Accuracy : ±0.1% of Full Scale ± 1 digit
Soak time range 0-999mins
Heater Relay On/Off with 3˚C hysteresis
Alarm Logic On for temp < Set Point-100˚C during soak time On for 30 seconds after end of soak time
Relay Rating 5 Amps/220V AC Relay Contact outputs
Memory Non-volatile EEPROM to save Set Temperature, Time and status
Supply 220V AC ± 15% @ 50/60Hz
Dimensions 96mm x 96mm x 135mm
Weight 800 grams
Related Products