Sale!
Peak Load And Displacement Recording Indicator

Peak Load and Displacement Indicator for UTMs with 10 peak recording in LED display

Please install and activate YITH WooCommerce Wishlist to add product wishlist
Category : Peak Load
SKU: CT904
Download Catalogue

Description

  • Separate displays for load indication and displacement
  • Range for load indication corresponding to 4-20mA input digitally settable from front panel
  • Calibration of displacement for different rotary encoders
  • Peak/Normal mode selectable
  • Up to 9 peaks can be recorded and recalled for Load and Displacement
  • Buzzer annunciation at Peak
  • Relay output for cut-off protection for load, displacement as well as breaking load
  • Digital tare for load and displacement provided to remove initial error
  • Non-volatile memory for saving configuration
  • Configuration lock at rear to prevent tampering with Range
  • Aesthetically designed front panel with membrane switches

Additional information

Your custom text or HTML.

Weight 700 lbs
Display

4 Digit 0.56” 7 segment Red LED display for Load (KN)
4 Digit 0.56” 7 segment Red LED display for Displacement (mm)
Range

o Load : 1KN to Range
o Displacement : 0.1mm to 999.9
Accuracy

±0.1% of Full Scale ± 1 digit
Input

From 2 wire loop transmitter giving 4-20mA output
4-20mA input => 0 – Range
For displacement from 3 wire Rotary encoder (+5V pulses)
Relay Logic

When Relay ON for Load ≥ Set Load Limit
Relay ON for Displacement ≥ Set Displacement Limit
Relay ON for Load falling below Breaking Load after peaking
Normal/Peak Mode

Selectable from front panel with LED indication of mode
Peak Read

9 peaks of both load and displacement with facility to reset memory
Peak Detection

Peak hold resettable from front Reset Switch or by a parallel rear external contact
Tare Facility (Zero)

Digital Tare using front panel Tare switch (for removing initial offset error). Tare also resets Displacement to Zero.
Memory

Non-volatile EEPROM to save settings
Configuration Lock

On rear terminals to prevent unauthorized/accidental alteration of Range using front switches
Supply

M220V AC ± 15% @ 50/60Hz
Dimensions

Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Additional Information

Display:
4 Digit 0.56” 7 segment Red LED display for Load (KN) 4 Digit 0.56” 7 segment Red LED display for Displacement (mm)
Range:
o Load : 1KN to Range o Displacement : 0.1mm to 999.9
Accuracy:
±0.1% of Full Scale ± 1 digit
Input:
From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 – Range For displacement from 3 wire Rotary encoder (+5V pulses)
Relay Logic:
When Relay ON for Load ≥ Set Load Limit Relay ON for Displacement ≥ Set Displacement Limit Relay ON for Load falling below Breaking Load after peaking
Normal/Peak Mode:
Selectable from front panel with LED indication of mode
Peak Read:
9 peaks of both load and displacement with facility to reset memory
Peak Detection:
Peak hold resettable from front Reset Switch or by a parallel rear external contact
Tare Facility (Zero):
Digital Tare using front panel Tare switch (for removing initial offset error). Tare also resets Displacement to Zero.
Memory:
Non-volatile EEPROM to save settings
Configuration Lock:
On rear terminals to prevent unauthorized/accidental alteration of Range using front switches
Supply:
M220V AC ± 15% @ 50/60Hz
Dimensions:
Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Related products