Seebeck effect, hot and cold junctions, cold junction compensation and why extension cable must match.
J, K, T, E, N, R, S and B compared — metals, ranges and typical applications.
ANSI vs IEC colours, ranges and tolerance tables in one downloadable chart.
Range, accuracy, drift, green-rot and when Type N or J is the better choice.
Resistance vs temperature, 2-, 3- and 4-wire connections, Class A vs B.
Accuracy, range, response and cost — which sensor fits your process.
Mineral-insulated sheaths; grounded, ungrounded and exposed junctions; surface and bayonet probes.
When you need a thermowell, insertion length, response time and vibration failure.
On/off vs PID, sensor input, relay vs SSR output, panel sizes and alarms.
Logging interval, channel set-up, sensor wiring and opening data in Excel.
USB pen drive vs PC software vs cloud — which suits your plant.
What ±1 °C really means and how to verify every channel.
How many sensors, where to place them and how long to log.
Symptom-by-symptom fixes for wrong readings, reversed wires, noise, drift and open circuits.
Furnace temperature control and multi-point monitoring.
Why one thermocouple is never enough.
Hold time, set point and soak timer control.
Stability chambers, cold rooms and validated records.
Cold room and warehouse temperature monitoring.
Storage ranges, sensor placement and records.
Storage ranges, alarms and temperature records.
Recommended limits, static risk and monitoring.
On/off and PID controllers for thermocouple and PT100.
Panel, wall-mounted and portable indicators.
8 and 16 channel loggers with USB pen drive output.
mV and mA sources for checking thermocouple loops.
Not sure which sensor or instrument you need? Share your process temperature, sensor and accuracy requirement.
© 2026 - countronics.com
WhatsApp us