Sale!
Peak Load Recording Indicator
Peak Load Recording Indicator
Peak Load Recording Indicator

Peak Load Indicator for CTMs with 10 peak recording in LED display, (This is usually supplied for Pressure Transmitter input but we provide the same for Load Cell input also at no extra cost)

Please install and activate YITH WooCommerce Wishlist to add product wishlist
Category : Peak Load
SKU: CT901
Download Catalogue

Description

  • Range for load indication corresponding to 4-20mA input digitally settable from front panel
  • Peak/Normal mode selectable
  • Up to 9 peaks can be recorded and recalled
  • Buzzer annunciation at Peak
  • Relay output for load limit detection with limit digitally settable
  • Digital tare provided to remove initial error
  • Non-volatile memory for saving configuration
  • Configuration lock at rear to prevent tampering with Range
  • Aesthetically designed front panel with membrane switches

Additional information

Your custom text or HTML.

Weight 700 lbs
Display

4 Digit 0.56” 7 segment Red LED display for Load (KN)
4 Digit 0.56” 7 segment Red LED display for Set Point (KN)
Range

1KN to 9999
Accuracy

±0.1% of Full Scale ± 1 digit
Input

From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 – Range
Relay Logic

When Actual Load ≥ Set Load Limit relay switches On
Normal/Peak Mode

Selectable from front panel with LED indication of mode
Peak Read

Last 9 peaks can be recalled with facility to reset memory
Peak Detection

Peak hold is resettable from front Reset Switch or by a parallel rear external contact
Memory

Non-volatile EEPROM to save settings
Table

On rear terminals to prevent unauthorized /accidental alteration of Range using front switches
Supply

220V AC ± 15% @ 50/60Hz
Dimensions

Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Additional Information

Display:
4 Digit 0.56” 7 segment Red LED display for Load (KN) 4 Digit 0.56” 7 segment Red LED display for Set Point (KN)
Range:
1KN to 9999
Accuracy:
±0.1% of Full Scale ± 1 digit
Input:
From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 – Range
Relay Logic:
When Actual Load ≥ Set Load Limit relay switches On
Normal/Peak Mode:
Selectable from front panel with LED indication of mode
Peak Read:
Last 9 peaks can be recalled with facility to reset memory
Peak Detection:
Peak hold is resettable from front Reset Switch or by a parallel rear external contact
Memory:
Non-volatile EEPROM to save settings
Table:
On rear terminals to prevent unauthorized /accidental alteration of Range using front switches
Supply:
220V AC ± 15% @ 50/60Hz
Dimensions:
Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Related products