Features
- 4 different timing ranges of 99.99sec, 999.9sec, 99Mins59Secs, 99Hrs59Mins,
- Press to start/Power On start/Cyclic modes settable
- Delayed On/Off programmable by user from front panel
- Up/Down time counting user settable
- User settable starting On/Off time for cyclic mode
- Number of cycles settable for cyclic mode
- Non-volatile memory to save configuration and timing
- Configuration lockable by rear jumper
- Front Reset/Start switch with parallel terminals at rear
- Aesthetically designed panel with membrane switches
Specification
| Display | 4 Digit 0.56” Red 7 segment LED display 4 Red LEDs to indicate selected timing range Red LED to indicate current status of Relay On/Off |
| Modes | User settable from front panel Power On start Press to start (with battery backup selection using EEPROM) Cyclic action |
| Number of Cycles | 1-99 cycles settable for cyclic mode after which the timer stops Setting number of cycles to Zero disables number of cycles setting |
| Reset/Start | Front Reset/Start switch with parallel terminals at rear to connect additional switch, if required. |
| Relay logic | Settable delayed On/Off, 5 Amps/220V AC Dual Relay Contact outputs |
| Timing direction | Up/Down time counting user settable |
| Memory | Non-volatile EEPROM to save settings |
| Configuration Lock | Open terminals 1&2 to lock all configuration except Set Limits |
| Supply | 220V AC ± 15% @ 50/60Hz |
| Dimensions | Front Facia: 96mmx96mmx135mm Cut Out: 91mmx91mm |
| Weight | 800 grams |
