

Countronics
Categories: Digital Counter
| Type | What it does | Typical use |
|---|---|---|
| Totalising / event counter | Counts and displays; no control output | Production records, machine strokes, footfall |
| Single preset counter | Relay operates at one target count | Batch packing, coil winding, cut-to-count |
| Two-set-limit counter | Pre-warning relay plus final relay | Slow-down before stop, two-stage filling |
| Dual-display counter | Shows set value and actual count together | Operator-friendly batching |
Countronics examples: the 246 event counter, the 256P single preset counter, the 2500 counter with two set limits and the 254D dual-display counter.
Every counter has a maximum input frequency. Mechanical contacts may only be reliable at a few counts per second, while electronic sensors can be counted far faster. If pulses arrive faster than the counter can read them, counts are silently lost. Work out the peak rate: a conveyor carrying 6 cartons per second needs at least 6 Hz, plus margin.
For cable, wire, fabric or paper, the counter reads pulses from a wheel or encoder and multiplies by a scale factor. Example: a 0.2 m circumference wheel with 10 pulses per turn gives 0.02 m per pulse — set the scale factor to 0.02 and the display reads directly in metres.
A totaliser only counts and displays. A preset counter also operates a relay when the count reaches a value you set, so it can stop a machine, cut material or end a batch.
Common causes are pulses faster than the counter’s input rating, contact bounce from mechanical switches, a dirty or misaligned photo sensor, or electrical noise from nearby motor cables.
Yes. Feed it pulses from a measuring wheel or encoder and set a scale factor, and it displays length in metres directly.
Not if the counter has power-failure memory, which stores the count and resumes from the same value when power returns.
A photo (optical) sensor is usual for non-metal products on a conveyor. Inductive proximity sensors suit metal targets.
Countronics makes event counters and programmable preset counters with single or dual set limits. Tell us what you count, the speed and the sensor, and we will recommend a model.
By Countronics
By Countronics
By Countronics

© 2026 - countronics.com
WhatsApp us